Continuous resin diamond glass grinding wheels are generally used in the third, fifth and seventh positions on the glass edging machine to grind the glass.
Brief Introduction
The continuous resin diamond glass grinding wheel is made of high quality resin bond and diamond sand, and is formed by high temperature hot pressing. The substrate is generally an aluminum substrate. It is suitable for straight edge machine and bilateral machine. In the deep processing of glass, the resin wheel is used for fine grinding after the diamond wheel process and before the polishing wheel process. It is mostly used at the 3rd position, the 5th position and the 7th position for glass grinding. There are 150 mm diameter on the 3rd position, the bottom of the ground glass, the grain size is 180# or 240#, the 5th and 7th positions. Use 130 mm for glass chamfering. The particle size is usually 240#-320#. Advantage: · Sharp and durable, easy to polish · Resin diamond grinding wheel has certain elasticity, and the processed glass has low roughness · Good self-sharpness, low calorific value during grinding, not easy to block, reducing the phenomenon of glass burns during grinding · The grinding wheel can be customized according to customer needs and provide professional installation and use guidance
Product Size
Other Product:
Product Application
Generally used for grinding architectural glass, photographic glass, automobile glass, etc.
